Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
make -C /media/storage/Downloads/OS/Drivers/DPO_RT5572_LinuxSTA_220.127.116.11_20121022/os/linux -f Makefile.6 installmake: Entering directory `/media/storage/Downloads/OS/Drivers/DPO_RT5572_LinuxSTA_18.104.22.168_20121022/os/linux'rm -rf /etc/Wireless/RT2870STAmkdir /etc/Wireless/RT2870STAcp /media/storage/Downloads/OS/Drivers/DPO_RT5572_LinuxSTA_22.214.171.124_20121022/RT2870STA.dat /etc/Wireless/RT2870STA/.install -d /lib/modules/3.10.10-1-ARCH/kernel/drivers/net/wireless/install -m 644 -c rt5572sta.ko /lib/modules/3.10.10-1-ARCH/kernel/drivers/net/wireless/install: cannot stat 'rt5572sta.ko': No such file or directorymake: *** [install] Error 1make: Leaving directory `/media/storage/Downloads/OS/Drivers/DPO_RT5572_LinuxSTA_126.96.36.199_20121022/os/linux'make: *** [install] Error 2
Then modify it, so it uses your downloaded driver and its md5-sum, which you placed in the same directory. Next, give it a try with "makepkg" again. All the other steps in the bbs-thread for the N750 might not be necessary, if the proprietary driver has your device's PCI ID already. Maybe the other patches in the PKGBUILD create problems though - but give it a go first. If you are lucky and it compiles, creating a package, make sure the "rt2800usb" is not loaded anymore before you try it.
Hello.I have a problem with my wifi adaptor.The problem is this : when I boot my pc ( from shutdown mode) all thing ok and my wifi adaptor finds the modems and It connect automatically to my network but when I restart from windows or linux to boot to the linux , then my wifi adaptor light is turned on after booting to linux but not finding the modems to connect.I should say that I dont have any problem with this wifi adaptor on my windows 10 and 11.And I should add this : I test other wifi adaptor and it works with no problems but this adaptor have problem after restart to boot to linux !I should say that I had this problem in other distros too and in garuda I have problem in connecting to network( because the driver not installed on garuda like other distros) and one of the admins says to install rtw88-dkms-git and that problem fixed that it reconnect to net randomly).but as I said I have problem after restart that my adaptor not find the modems and I should always replug my wifi adaptor to find my modems after restart mode.
yes before I test other wifi adaptor Bus 001 Device 005: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter I thought like you that dual boot can cause problem.in MT7601U adaptor I dont see problem after restart on linux and it is ok all the time I can say.But with rt2870/rt3070 wifi adaptor I have problem after restart on linux.I test lts kernel but nothing happen and not help me.about linux kernel and mainline kernel , I want to test them but when I choose them on grub panel after boot my machine , they can't load the garuda linux and stuck at loading linux kernel black page.power saving for wifi was turned off at windows device manager settings and fastboot is disabled from uefi settings.Are you sure you give me a correct driver for my wifi adaptor?before I install it I have problem in connecting to internet but after it was fixed but the main problem not fixed( I mean the problem that wifi not find net after restart).I ask are you sure , because the driver likely for the 8822ce, de ,... models.because in the below topic the who has the problem with his adaptor is other model :Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
ok but now I am on garuda linux !and because of that I make this topic.the thing that was confusing me is that when I didnt install rtw88-dkms-git , my wifi adaptor connecting to internet but I think it was disconnecting and again connecting and connection not stable and disconnecting much and after I install that driver and then my wifi working well and it has just not working after reboots to garuda linux like that I see this behaviour on ubuntu too( I didnt install driver at ubuntu for wifi ) .some mins ago I uninstalled rtw88-dkms-git and then reboot , then I see that my wifi adaptor not working at all !even when I replug it.what is the problem here ?and what driver would you suggest?
I think you mean that rtw88-dkms-git cant make the ralink rt2870/rt3070 working?but if you want I reinstall it again and say it is working or not after installation of that driver?for me this is a question how my adapter working with driver ?!after I uninstalled that , then my wifi not working with rt2870/rt3070 adapter!is rtw88-dkms-git installed by default on garuda linux?
hello, please can help me anyone, i will use alfa awus051nh v2 on kali linux 2016.2 but doesnt work.Maybe can send me the right driver what works on this kali linux kernel 4.6.0. I dont find it on google.